All Categories

IQOS Not Charging? Here’s What to Do if It’s Just Blinking!

IQOS Not Charging Just Blinking!

Share This Post

Table of Contents

If you’re using an IQOS and the charging light is blinking red, you’re probably frustrated and looking for answers. In this guide, we’ll go through why this happens, the causes, and the steps to troubleshoot and fix it. Whether you have an IQOS Iluma I One, Iluma Standard, IQOS Iluma Prime, Lambda CC, IQOS 3 Duo, IQOS Originals Duo, or Lil Solid Ez, these solutions are for you to fix the blinking light and get back to using your device without interruptions.

Why Is My IQOS Blinking Red?

The red blinking light on IQOS devices is a common problem and means your device has bad contact with the charger. This can happen for a few reasons: dust or debris in the charging contacts, a loose charging connection, or even a problem with the charger itself. If left unattended, this can prevent your IQOS from charging.

Causes of IQOS blinking red light

Here are the main causes and symptoms:

CauseDescription
Poor Contact with ChargerMisalignment or dust in charging contacts can prevent proper charging.
Faulty ChargerMalfunctioning chargers can lead to intermittent charging issues.
Software GlitchA software bug can cause a blinking light, often resolved with a reset.
Battery IssuesA depleted or damaged battery can trigger the red blinking light.
Device OverheatingOverheating can cause the device to blink as a warning signal.

Step-by-step Guide to Fixing the IQOS Blinking Red Light

Here’s how to troubleshoot and fix the issue, step-by-step.

1. Check the charging contacts

  • Inspect the contacts on both your device and charger for any dust, dirt, or debris.
  • Clean the contacts gently using a soft cloth or cotton swab. Avoid using water or cleaning solutions.
  • Align the device correctly in the charger to ensure a firm connection.

2. Try a Different Charger

If the issue persists, it’s worth testing with a different IQOS-compatible charger or cable. Sometimes, the charger itself may be the problem.

3. Reset Your IQOS Device

  • Locate the reset button on your device. For IQOS Iluma models, this is typically a small button on the side or near the base.
  • Hold the button down for about 10 seconds until the lights flash.
  • Release the button and allow the device to restart. Check if the red light has stopped blinking.

4. Allow the device to cool down.

If you’ve been using your device heavily or charging it in a warm environment, give it some time to cool down. Avoid charging it until it’s at a normal temperature.

5. Test the battery life.

If none of the above steps work, there may be an issue with your battery. Contact IQOS support or visit an IQOS service centre to have the battery tested and replaced if necessary.

IQOS models and common charging issues

Each IQOS model has unique design elements and may have specific charging issues. Here’s a quick look at potential charging issues for each model:

ModelCommon Charging IssueRecommended Solution
IQOS Iluma I One & Iluma StandardPoor contact due to debris in charging slot.Clean contacts regularly and ensure proper alignment.
IQOS Iluma PrimeProne to overheating if charged in hot environments.Charge in a cool, ventilated space.
Lambda CCCheck the battery periodically and replace if needed.Handle the charging port with care.
IQOS 3 Duo & IQOS ORIGINALS DuoBattery wear due to frequent use.Poor contact due to debris in the charging slot.
Lil Solid EzRequires frequent resets for charging issues.Perform a reset as needed if the blinking red light appears.

Preventative Tips to Avoid Blinking Light Issues

Following some preventative tips can help you avoid blinking light issues in the future.

TipDescription
Keep Charging Contacts CleanWipe down contacts regularly to prevent buildup that can interfere with charging.
Avoid OverchargingUnplug your IQOS once fully charged to prevent overheating and battery wear.
Store in Cool, Dry PlaceHeat and humidity can damage internal components, causing charging problems.
Update Firmware RegularlySome models allow firmware updates to fix bugs that may cause charging issues.

Conclusion

The blinking red light on your IQOS can be annoying, but with the right solution, you can fix this and get back to using your IQOS. By cleaning the contacts, checking the charger, and following the right charging procedures, you can keep your IQOS running and extend its life. For More IQOS Device Related Problems You can Visit Our Terea Dubai Online store Now.

FAQs About IQOS Blinking Red Light

Why is my IQOS still blinking red after cleaning the contacts?

If cleaning didn’t help, try using a different charger or resetting the device. If the issue persists, there may be a problem with the battery or internal components.

How can I reset my IQOS 3 Duo?

To reset the IQOS 3 Duo, press and hold the power button for about 10 seconds until the light flashes, then release. This will reboot the device.

Can a software glitch cause the IQOS to blink red?

Yes, occasionally a software issue may trigger the blinking red light. Resetting the device can often resolve this.

How do I know if my IQOS charger is faulty?

Test the charger with another IQOS device if possible. If it doesn’t work, it may be defective and require replacement.

How long should I let my IQOS cool down if it’s overheating?

Give your device around 15–30 minutes to cool before trying to charge it again. Charging a hot device can worsen the issue.

Is it safe to use a non-IQOS charger with my device?

While some third-party chargers may work, using only IQOS-approved chargers is recommended to avoid damage and ensure safe charging.

Can I fix a dead IQOS battery at home?

If the battery has completely died, it’s best to have it professionally replaced at an IQOS service centre.

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Shopping cart

1 Hour Delivery in Dubai , Ajman , Sharjah. 12 Hour Delivery in All Over UAE. Free Delivery For Order over 450 AED

Sign in

No account yet?

0 items Cart
Menu
[]